NEWS & CASES
  • Introduction of Coating Defoamer Properties

    By : Zilibon
    2018/6/5
    • Share :
    Back to list

    With the development of the coatings industry and the market's demand for coatings, the types and grades are also rising. Everyone places high demands on the protection of the coating application objects and the decorative nature of the coating application objects. However, in the application process, due to blistering caused by coating film shrinkage, defects, pinholes and other undesirable phenomena, resulting in coating film appearance, protection and the decorative effect is not good. Therefore, it is often necessary to add coating defoamers, specifically how to choose the defoamer, so that the Zilibon introduce for everyone.

    With the development of the coatings industry and the market's demand for coatings, the types and grades are also rising. Everyone places high demands on the protection of the coating application objects and the decorative nature of the coating application objects. However, in the application process, due to blistering caused by coating film shrinkage, defects, pinholes and other undesirable phenomena, resulting in coating film appearance, protection and the decorative effect is not good. Therefore, it is often necessary to add coating defoamers, specifically how to choose the defoamer, so that the Zilibon introduce for everyone.

    Defoamer Characteristic:

    1. Defoaming, strong foam suppression, and low dosage do not affect the basic properties of the foaming system.

    2. Whether it is an oil-based paint or a water-based paint, it can quickly integrate into the system and has good dispersion without affecting the original gloss color of the product.

    3, chemical stability, no corrosion, non-toxic, no adverse side effects, non-flammable, non-explosive.

    Defoamer Instructions:

    One, can be added directly to the original solution.

    Second, it can also be added in batches, adding half in the grinding stage, suppressing foam production, and then adding another half.

    Third, add the amount of the total formula: 0.1 to 0.5%. Use the amount of experiment.


    Zilibon Chemical Manufacturer - focus on solving various foam problems in production and processing, because of the focus on professionalism.

  • Hot Forcus
    Zilibon Defoamer Agent Control Foam Effectivly
    Foaming could be a physical i...
    Defoaming Agent In Paint Eliminate Foam Mechanism
    In several stages of producti...
    Defoamer Used In Paint For Liquid System
    Defoamer used in paint may be...
    Antifoam Agents For Paint Eliminate Foam
    Antifoam agent for paint ar a...
    Defoaming Agents For Paint In Waterborne Systems
    Defoaming agents for paint sq...
  • Contact information
    Address : 19th Floor, B1 Building, Everbright We Valley, Songshan Lake Headquarters , The second Road, No.4, Dongguan,Guangdong, China.
    Contacts : Crystal Jin
    24 hours hot-line : 0086 13929201380
    Fax : 0086 769 26381220
    E-mail : [email protected]
    E-mail2 : [email protected]
  • FOLLOW
  • NEWSLETTER
    Reach Out to the FreshySites Team
    Reach to get started on your project? Have questions for us?
    Get in touch! We’re easy to get ahold of.
COPYRIGHT © 1999 GUANGDONG ZILIBON CHEMICAL CO.,LTD.