Some people should be unfamiliar with oil-free powder, but for the industry that uses degreasing powder, this is a must-have. Degreaser is used in the metal cleaning industry, and the cutting fluid needs to be sprayed during metal cleaning. Although the degreaser is important for metal cutting, the biggest problem is that the degreaser is easy to foam after spraying, the foam will affect the later process and the foam will not be destroyed in a short time. At this time, it can be treated with a degreasing agent.
Degreasing powder defoamer for cleaning metal
Degreasing powder defoamer can effectively eliminate all foam, and can inhibit foam for a long time. It is made up of special modified polyether and fluorine-containing raw materials through special process, and has excellent defoaming. Performance and anti-foaming effect, very easy to dissolve in water, and does not float oil does not float.
How to use the defoamer defoamer? Since it is a defoamer for degreasing powder, it is necessary to add defoamer defoamer to the degreasing powder for metal spraying. Recommended dosage: The amount of defoamer added is 0.05%~0.3%, but the most economical dosage should be determined after the process test; it can also be mixed with other powder additives.
Zilibon degreasing agent defoamer can solve the above foam problem well. Secondly, we are a defoamer manufacturer with 16 years of application experience. It has won the recognition and trust of many customers. The company has a group of excellent engineers and one Independent laboratories can perform good research experiments on products. If you are interested in our products, you can call directly: +86 13929201380.
This article is from the manufacturer of Zilibon defoamer (http://www.zilibon.com/), please indicate the source if you need to reprint.