NEWS & CASES
  • Mistakes in The Selection of Paint Defoamers

    By : Zilibon
    2019/1/9
    • Share :
    Back to list

    Are you producing paint? Is it a solid antifoam? Then you enter the wrong zone, the paint industry does not recommend everyone to choose solid defoamer, for three reasons:

    Mistakes in the selection of paint defoamers

    Coating defoamer

    First, easy to precipitate

    The solid defoamer is usually added in a sprinkling manner, and the viscosity of the coating is relatively large. If the solid antifoam granules are relatively small, it is very likely that the particles are not effectively dissolved, and finally a large amount of precipitated substance is produced.

    Second, the compatibility is not good

    Due to the viscosity of the coating, the solid antifoam granules will not dissolve, some will form a precipitate, and the other part may be mixed in the paint, so that the paint will produce a magazine, then the paint will have pores in the coating, which will affect the overall effect.

    Third, the increase in production costs

    Due to the compatibility problems and precipitation problems of the solid defoamer in the coating, the foam problem of the coating cannot be eliminated in time, so it is necessary to add a large amount of defoaming agent, which will increase the overall production cost; The solid defoamer in water, and then added, will also greatly reduce the performance of the solid defoamer.

    Zilibon is a manufacturer with 16 years of application experience. It has far more defoaming technology than other antifoaming agents in the market. From the above cases, we prove the strength of our Zilibon defoamer. We have a group of excellent defoaming engineers, and An independent laboratory that facilitates defoaming experiments with foams that are difficult for customers to solve. If you want to know more about defoaming agent products, you can call our hotline: +86 13929201380.

    This article is from the manufacturer of Zilibon defoamer (http://www.zilibon.com/), please indicate the source if you need to reprint.

  • Hot Forcus
  • Contact information
    Address : 19th Floor, B1 Building, Everbright We Valley, Songshan Lake Headquarters , The second Road, No.4, Dongguan,Guangdong, China.
    Contacts : Miss Lee
    24 hours hot-line : 0086 13929201380
    Fax : 0086 769 26381220
    E-mail : [email protected]
  • FOLLOW
  • NEWSLETTER
    Reach Out to the FreshySites Team
    Reach to get started on your project? Have questions for us?
    Get in touch! We’re easy to get ahold of.
COPYRIGHT © 1999 GUANGDONG ZILIBON CHEMICAL CO.,LTD.