FeedBack

The synthetic latex defoamer is mainly make from organic material and various kinds of active additives, it’s easy to disperse in aqueous system.

 Advantages:

Strong self-emulsified ability, fast defoaming performance, lasting defoaming effect, especially efficient when working in water-soluble polymer system and middle/ low viscosity system. No fish-eye situation.

(1) Strong defoaming and foam suppressing ability, small dosage, no effect to the basic properties of the foaming system.

(2) Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side effects.

(3) Comparable to the top quality product on market, ,while price is much more affordable.

This defoamer is used in white latex, natural emulsion, natural rubber, synthetic latex, synthetic fiber, synthetic resin emulsion, synthetic rubber, etc.

Apply to synthetic latex industry                                                     Apply to natural/ synthetic rubber industry

Usage: Direct add this defoamer to the foaming system, or adding after diluting when the temperature is below 50℃.

Recommended dosage: 0.2~1%. The optimal dosage should be determined through laboratory test.

1. Packing: 60KG, 200KG, 1000KG /Plastic drum, or as customer required.

2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the container should be sealed tightly at around 25℃.

3. The shelf life is about 12 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.